Aztec Power Amplifier HV-4X120 100V

Descriptions & Features
The series of PA amplifiers are designed for background music/paging and public address system installations,these units are exceptional values, loaded with features, and are easy to install in a variety of system designs.
The 4-channel power amplifier features two channels for four channel speaker selector individually,with four groups of either 70/100-volt or 4 to 16 ohms(Ω) output loads.
And features complete protection is provided for output short circuit,overload, high temperature, peak current limiters.
● 2U aluminium panel
● With 4 channel speaker selectors
● 4 line inputs
● Individual volume controller for each zone
● 4 groups of 70V, 100V and 4~16Ω output loads
● Output short circuit,overload,high temperature protection

Important Notes
• 16 Ω output drives the speakers based on impedances
• 70V/100V outputs drive the speakers with transformer
• Do not use both the 4-16 Ω,70V and 100V terminals at the same time
• Impedances indicated in the figures represent the total speaker system (load) impedances

Specifications
– Rated Power : 4x120W
– Output Mode : 4-16 ohms(Ω) and 70V/100V
– Line Input : 10K ohms(Ω) 260mV~470mV,unbalanced
– AUX Output : 0.775V(0dB)
– Fre. Response : 60Hz~15KHz(±3dB)
– THD : <0.5% at 1kHz,1/3 rated power
– S/N : ≥85dB
– Cooling : DC12V FAN
– Indicators : TEMP, POWER, CLIP, SIGNAL, PROTECT
– Protection : AC FUSE×10A
– Output Regulation : <3 dB,from level without signal to be loaded fully
– Controls : 1 volume control, power on/off
– Power Consumption : 680W
– N.W : 18.5kg
– Dimension : 89(H)*483(W)*366(D)MM